PenangAPRS Track

My position About ☰

reset

LZ0VRC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0VRC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Humi*	Presaure*	Power*
1769804207	5.65 C	82.8 %RH	962 hPa	5.63 V
1769804207	5.65 C	82.8 %RH	962 hPa	5.63 V
1769803907	5.73 C	82.8 %RH	962 hPa	5.68 V
1769803607	5.65 C	82.8 %RH	962 hPa	5.59 V
1769803607	5.65 C	82.8 %RH	962 hPa	5.59 V
1769803307	5.69 C	82.8 %RH	962 hPa	5.66 V
1769803011	5.67 C	82.8 %RH	962 hPa	5.62 V
1769803007	5.67 C	82.8 %RH	962 hPa	5.62 V
1769802707	5.69 C	82.8 %RH	962 hPa	5.6 V
1769802407	5.65 C	82.8 %RH	962 hPa	5.65 V
1769802407	5.65 C	82.8 %RH	962 hPa	5.65 V
1769802107	5.73 C	82.8 %RH	962 hPa	5.6 V
1769801807	5.73 C	82.8 %RH	962 hPa	5.65 V
1769801807	5.73 C	82.8 %RH	962 hPa	5.65 V
1769801507	5.69 C	82.8 %RH	962 hPa	5.61 V
1769801207	5.65 C	82.8 %RH	962 hPa	5.65 V
1769801207	5.65 C	82.8 %RH	962 hPa	5.65 V
1769800907	5.59 C	82.8 %RH	962 hPa	5.66 V
1769800607	5.71 C	82.8 %RH	962 hPa	5.67 V
1769800607	5.71 C	82.8 %RH	962 hPa	5.67 V
1769800307	5.8 C	82.8 %RH	962 hPa	5.61 V
1769800007	5.76 C	82.8 %RH	962 hPa	5.62 V
1769800007	5.76 C	82.8 %RH	962 hPa	5.62 V
1769799707	5.84 C	82.8 %RH	962 hPa	5.61 V
1769799407	5.71 C	82.8 %RH	962 hPa	5.61 V

*Used Equation Coefficients:

Temp: 0, 0.01, 0

Humi: 0, 0.01, 0

Presaure: 0, 1, 0

Power: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)