PenangAPRS Track

My position About ☰

reset

N7UV-44 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N7UV-44. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V_Batt*	V_Ext*	RX_rate*
1790337210	4.11 VDC	13.2 VDC	750 pkt/h
1790336610	4.11 VDC	13.2 VDC	750 pkt/h
1790336010	4.12 VDC	13.18 VDC	636 pkt/h
1790335410	4.12 VDC	13.18 VDC	612 pkt/h
1790334810	4.12 VDC	13.12 VDC	708 pkt/h
1790334210	4.11 VDC	13.18 VDC	684 pkt/h
1790333610	4.1 VDC	13.14 VDC	522 pkt/h
1790333009	4.11 VDC	13.18 VDC	966 pkt/h
1790332409	4.11 VDC	13.18 VDC	630 pkt/h
1790331809	4.11 VDC	13.18 VDC	474 pkt/h
1790331209	4.11 VDC	13.14 VDC	791 pkt/h
1790330608	4.1 VDC	13.14 VDC	630 pkt/h
1790330008	4.11 VDC	13.18 VDC	582 pkt/h
1790329408	4.12 VDC	13.14 VDC	834 pkt/h
1790328807	4.11 VDC	13.18 VDC	744 pkt/h
1790328207	4.12 VDC	13.18 VDC	732 pkt/h
1790327607	4.11 VDC	13.18 VDC	690 pkt/h
1790327007	4.11 VDC	13.2 VDC	786 pkt/h
1790326407	4.11 VDC	13.14 VDC	726 pkt/h
1790325806	4.11 VDC	13.18 VDC	678 pkt/h
1790325206	4.12 VDC	13.2 VDC	840 pkt/h
1790324606	4.11 VDC	13.18 VDC	564 pkt/h
1790324006	4.1 VDC	13.18 VDC	708 pkt/h
1790323406	4.11 VDC	13.16 VDC	636 pkt/h
1790322805	4.12 VDC	13.2 VDC	654 pkt/h

*Used Equation Coefficients:

V_Batt: 0, 0.01, 0

V_Ext: 0, 0.02, 0

RX_rate: 0, 1, 0

RelRate: 0, 1, 0

DrpRate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)