This is the latest recevied telemetry packets stored in our database for station/object HB9TVP-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769784367 | 313 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769782566 | 312 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769780766 | 311 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769778971 | 310 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769777170 | 309 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769775369 | 308 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769773569 | 307 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769771768 | 306 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769769967 | 305 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769768166 | 304 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769766366 | 303 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769764565 | 302 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769762764 | 301 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769760964 | 300 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769759163 | 299 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769757370 | 298 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769755569 | 297 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769753769 | 296 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769751968 | 295 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769750167 | 294 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769748366 | 293 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769746566 | 292 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769744765 | 291 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769742964 | 290 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1769741163 | 289 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)