This is the latest recevied telemetry packets stored in our database for station/object SP2HCA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786412027 | 22 Count | 248 Count | 12 Count | 4.01 VDC | 0.08 VDC |
| 1786410525 | 19 Count | 184 Count | 10 Count | 4.01 VDC | 0.08 VDC |
| 1786409024 | 16 Count | 116 Count | 9 Count | 4 VDC | 0.08 VDC |
| 1786408454 | 11 Count | 106 Count | 8 Count | 4 VDC | 0.08 VDC |
| 1786406953 | 7 Count | 84 Count | 5 Count | 4 VDC | 0.08 VDC |
| 1786405452 | 6 Count | 55 Count | 5 Count | 4 VDC | 0.08 VDC |
| 1786403950 | 2 Count | 31 Count | 2 Count | 4.01 VDC | 0.08 VDC |
| 1786402448 | 153 Count | 1004 Count | 120 Count | 4 VDC | 0.08 VDC |
| 1786400947 | 151 Count | 977 Count | 119 Count | 4 VDC | 0.08 VDC |
| 1786399439 | 148 Count | 959 Count | 117 Count | 4.01 VDC | 0.08 VDC |
| 1786397938 | 144 Count | 938 Count | 114 Count | 4.01 VDC | 0.08 VDC |
| 1786396422 | 141 Count | 912 Count | 112 Count | 4 VDC | 0.08 VDC |
| 1786394920 | 136 Count | 886 Count | 108 Count | 4 VDC | 0.08 VDC |
| 1786393419 | 131 Count | 850 Count | 104 Count | 4 VDC | 0.08 VDC |
| 1786391917 | 122 Count | 777 Count | 96 Count | 4 VDC | 0.08 VDC |
| 1786390416 | 116 Count | 711 Count | 91 Count | 4 VDC | 0.08 VDC |
| 1786388914 | 110 Count | 657 Count | 86 Count | 4 VDC | 0.08 VDC |
| 1786387413 | 102 Count | 607 Count | 80 Count | 4.02 VDC | 0.08 VDC |
| 1786386832 | 96 Count | 593 Count | 78 Count | 4.01 VDC | 0.08 VDC |
| 1786385331 | 91 Count | 558 Count | 74 Count | 4 VDC | 0.08 VDC |
| 1786383830 | 85 Count | 523 Count | 69 Count | 4.01 VDC | 0.08 VDC |
| 1786382328 | 79 Count | 492 Count | 64 Count | 4.01 VDC | 0.08 VDC |
| 1786380827 | 72 Count | 455 Count | 58 Count | 4.02 VDC | 0.08 VDC |
| 1786379325 | 66 Count | 421 Count | 53 Count | 4.01 VDC | 0.08 VDC |
| 1786377824 | 62 Count | 394 Count | 50 Count | 4.02 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)