This is the latest recevied telemetry packets stored in our database for station/object VK2TBL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792736146 | 539 Count | 615 Count | 481 Count | 4.27 VDC | 0.14 VDC |
| 1792734342 | 487 Count | 531 Count | 430 Count | 4.24 VDC | 0.14 VDC |
| 1792732539 | 477 Count | 522 Count | 421 Count | 4.27 VDC | 0.14 VDC |
| 1792730736 | 463 Count | 508 Count | 408 Count | 4.24 VDC | 0.14 VDC |
| 1792728933 | 401 Count | 417 Count | 347 Count | 4.26 VDC | 0.14 VDC |
| 1792727130 | 394 Count | 411 Count | 341 Count | 4.27 VDC | 0.14 VDC |
| 1792725326 | 387 Count | 405 Count | 335 Count | 4.28 VDC | 0.14 VDC |
| 1792723523 | 377 Count | 395 Count | 326 Count | 4.25 VDC | 0.14 VDC |
| 1792721794 | 370 Count | 393 Count | 324 Count | 4.28 VDC | 0.14 VDC |
| 1792719991 | 366 Count | 390 Count | 321 Count | 4.24 VDC | 0.14 VDC |
| 1792718188 | 362 Count | 387 Count | 318 Count | 4.24 VDC | 0.14 VDC |
| 1792716385 | 357 Count | 383 Count | 314 Count | 4.27 VDC | 0.14 VDC |
| 1792714581 | 352 Count | 379 Count | 310 Count | 4.28 VDC | 0.14 VDC |
| 1792712778 | 347 Count | 375 Count | 306 Count | 4.26 VDC | 0.14 VDC |
| 1792710975 | 342 Count | 371 Count | 302 Count | 4.26 VDC | 0.14 VDC |
| 1792709172 | 337 Count | 367 Count | 298 Count | 4.28 VDC | 0.14 VDC |
| 1792707369 | 332 Count | 363 Count | 294 Count | 4.23 VDC | 0.14 VDC |
| 1792705565 | 327 Count | 359 Count | 290 Count | 4.27 VDC | 0.14 VDC |
| 1792703762 | 314 Count | 340 Count | 278 Count | 4.26 VDC | 0.14 VDC |
| 1792701959 | 304 Count | 325 Count | 269 Count | 4.27 VDC | 0.14 VDC |
| 1792700156 | 295 Count | 313 Count | 261 Count | 4.25 VDC | 0.14 VDC |
| 1792698352 | 289 Count | 308 Count | 256 Count | 4.25 VDC | 0.14 VDC |
| 1792696549 | 285 Count | 305 Count | 253 Count | 4.24 VDC | 0.14 VDC |
| 1792694746 | 279 Count | 300 Count | 248 Count | 4.26 VDC | 0.14 VDC |
| 1792692943 | 273 Count | 295 Count | 243 Count | 4.26 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)