This is the latest recevied telemetry packets stored in our database for station/object OK2ILA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769791149 | 4.04 C | 2.1 | 8052 | 0 | 0 |
| 1769790246 | 4.05 C | 3.2 | 8045 | 0 | 0 |
| 1769789343 | 4.06 C | 5.3 | 8027 | 0 | 0 |
| 1769789225 | 4.06 C | 4.2 | 8069 | 0 | 0 |
| 1769789200 | 4.06 C | 3.6 | 8065 | 0 | 0 |
| 1769789150 | 4.06 C | 3.6 | 8056 | 0 | 0 |
| 1769789135 | 4.06 C | 3.2 | 8060 | 0 | 0 |
| 1769789087 | 4.06 C | 3.2 | 8053 | 0 | 0 |
| 1769789063 | 4.06 C | 3.1 | 8038 | 0 | 0 |
| 1769789047 | 4.06 C | 3.1 | 8038 | 0 | 0 |
| 1769789032 | 4.06 C | 3.1 | 8043 | 0 | 0 |
| 1769788995 | 4.06 C | 3.1 | 8044 | 0 | 0 |
| 1769788231 | 4.07 C | 3.6 | 8051 | 0 | 0 |
| 1769788201 | 4.07 C | 3 | 8048 | 0 | 0 |
| 1769788186 | 4.07 C | 3 | 8050 | 0 | 0 |
| 1769788171 | 4.07 C | 3 | 8046 | 0 | 0 |
| 1769788156 | 4.07 C | 2.5 | 8041 | 0 | 0 |
| 1769788141 | 4.07 C | 2.5 | 8046 | 0 | 0 |
| 1769788126 | 4.07 C | 2.5 | 8049 | 0 | 0 |
| 1769788111 | 4.07 C | 2.5 | 8051 | 0 | 0 |
| 1769788096 | 4.07 C | 2.2 | 8056 | 0 | 0 |
| 1769788074 | 4.07 C | 2.2 | 8053 | 0 | 0 |
| 1769788056 | 4.07 C | 2.2 | 8060 | 0 | 0 |
| 1769786176 | 4.1 C | 3.9 | 8049 | 0 | 0 |
| 1769786153 | 4.1 C | 3.2 | 8052 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)