This is the latest recevied telemetry packets stored in our database for station/object KK7MLJ-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769796769 | 18.5 C | 29.49 % | 1030.25 hPa | 0 | 0 |
| 1769789537 | 15 C | 31.01 % | 1029.5 hPa | 0 | 0 |
| 1769780740 | 4.3 C | 29.86 % | 1027.63 hPa | 0 | 0 |
| 1769752820 | 18.6 C | 23.24 % | 1027.38 hPa | 0 | 0 |
| 1769743815 | 25.4 C | 21.67 % | 1026.25 hPa | 0 | 0 |
| 1769738333 | 32.2 C | 22.94 % | 1026 hPa | 0 | 0 |
| 1769737532 | 29.8 C | 24.42 % | 1026 hPa | 0 | 0 |
| 1769733105 | 26.6 C | 29.8 % | 1026.38 hPa | 0 | 0 |
| 1769731970 | 20.1 C | 32.3 % | 1025.25 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)