This is the latest recevied telemetry packets stored in our database for station/object SP2MG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794357567 | 819 Count | 9 Count | 0 Count | 4.26 VDC | 0.16 VDC |
| 1794355787 | 817 Count | 9 Count | 0 Count | 4.28 VDC | 0.16 VDC |
| 1794353984 | 815 Count | 9 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1794352183 | 813 Count | 9 Count | 0 Count | 4.29 VDC | 0.16 VDC |
| 1794350381 | 811 Count | 9 Count | 0 Count | 4.24 VDC | 0.16 VDC |
| 1794348580 | 809 Count | 9 Count | 0 Count | 4.29 VDC | 0.16 VDC |
| 1794346778 | 807 Count | 9 Count | 0 Count | 4.28 VDC | 0.16 VDC |
| 1794344976 | 805 Count | 9 Count | 0 Count | 4.27 VDC | 0.16 VDC |
| 1794343175 | 803 Count | 9 Count | 0 Count | 4.26 VDC | 0.16 VDC |
| 1794341373 | 801 Count | 9 Count | 0 Count | 4.25 VDC | 0.16 VDC |
| 1794339572 | 799 Count | 9 Count | 0 Count | 4.24 VDC | 0.16 VDC |
| 1794337770 | 797 Count | 9 Count | 0 Count | 4.28 VDC | 0.16 VDC |
| 1794335968 | 795 Count | 9 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1794334191 | 793 Count | 9 Count | 0 Count | 4.25 VDC | 0.16 VDC |
| 1794332389 | 791 Count | 9 Count | 0 Count | 4.28 VDC | 0.16 VDC |
| 1794330588 | 789 Count | 9 Count | 0 Count | 4.29 VDC | 0.16 VDC |
| 1794328786 | 787 Count | 9 Count | 0 Count | 4.28 VDC | 0.16 VDC |
| 1794326985 | 785 Count | 9 Count | 0 Count | 4.27 VDC | 0.16 VDC |
| 1794325183 | 783 Count | 9 Count | 0 Count | 4.26 VDC | 0.16 VDC |
| 1794323381 | 781 Count | 9 Count | 0 Count | 4.26 VDC | 0.16 VDC |
| 1794321579 | 779 Count | 9 Count | 0 Count | 4.29 VDC | 0.16 VDC |
| 1794319778 | 777 Count | 9 Count | 0 Count | 4.28 VDC | 0.16 VDC |
| 1794291029 | 769 Count | 9 Count | 0 Count | 4.25 VDC | 0.16 VDC |
| 1794289227 | 767 Count | 9 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1794287451 | 765 Count | 9 Count | 0 Count | 4.26 VDC | 0.16 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)