This is the latest recevied telemetry packets stored in our database for station/object 5B4ANU-20. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780191944 | 3.68 VDC | 2.56 VDC | 0 | 0 | 0 |
| 1780191044 | 3.69 VDC | 2.32 VDC | 0 | 0 | 0 |
| 1780190144 | 3.69 VDC | 2.38 VDC | 0 | 0 | 0 |
| 1780189244 | 3.7 VDC | 2.32 VDC | 0 | 0 | 0 |
| 1780188343 | 3.71 VDC | 3.02 VDC | 0 | 0 | 0 |
| 1780187443 | 3.71 VDC | 2.22 VDC | 0 | 0 | 0 |
| 1780186543 | 3.71 VDC | 2.38 VDC | 0 | 0 | 0 |
| 1780185643 | 3.71 VDC | 2.26 VDC | 0 | 0 | 0 |
| 1780184742 | 3.72 VDC | 2.38 VDC | 0 | 0 | 0 |
| 1780183842 | 3.72 VDC | 2.22 VDC | 0 | 0 | 0 |
| 1780182942 | 3.73 VDC | 2.32 VDC | 0 | 0 | 0 |
| 1780182042 | 3.73 VDC | 2.14 VDC | 0 | 0 | 0 |
| 1780181142 | 3.74 VDC | 1.96 VDC | 0 | 0 | 0 |
| 1780180241 | 3.74 VDC | 1.7 VDC | 0 | 0 | 0 |
| 1780179341 | 3.75 VDC | 1.44 VDC | 0 | 0 | 0 |
| 1780178441 | 3.76 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1780177541 | 3.66 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1780176640 | 3.73 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1780175740 | 3.77 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1780174840 | 3.77 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1780173940 | 3.78 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1780173040 | 3.74 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1780172139 | 3.8 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1780171239 | 3.81 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1780170339 | 3.78 VDC | 0.72 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)