This is the latest recevied telemetry packets stored in our database for station/object EA4RCR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1773754365 | 23 | 32 | 939 | 0 | 0 |
| 1773753765 | 23 | 32 | 939 | 0 | 0 |
| 1773753166 | 23 | 32 | 939 | 0 | 0 |
| 1773752565 | 23 | 32 | 939 | 0 | 0 |
| 1773751965 | 23 | 33 | 939 | 0 | 0 |
| 1773751366 | 23 | 33 | 939 | 0 | 0 |
| 1773750765 | 23 | 33 | 940 | 0 | 0 |
| 1773750166 | 23 | 32 | 940 | 0 | 0 |
| 1773749565 | 23 | 32 | 940 | 0 | 0 |
| 1773748965 | 23 | 33 | 940 | 0 | 0 |
| 1773748365 | 23 | 33 | 940 | 0 | 0 |
| 1773747765 | 23 | 33 | 940 | 0 | 0 |
| 1773747165 | 23 | 33 | 941 | 0 | 0 |
| 1773746565 | 22 | 33 | 941 | 0 | 0 |
| 1773745965 | 23 | 32 | 941 | 0 | 0 |
| 1773745365 | 22 | 32 | 941 | 0 | 0 |
| 1773744765 | 22 | 33 | 941 | 0 | 0 |
| 1773744165 | 22 | 33 | 941 | 0 | 0 |
| 1773743565 | 22 | 32 | 941 | 0 | 0 |
| 1773742965 | 22 | 32 | 941 | 0 | 0 |
| 1773742365 | 22 | 32 | 941 | 0 | 0 |
| 1773741765 | 22 | 32 | 941 | 0 | 0 |
| 1773741165 | 22 | 31 | 941 | 0 | 0 |
| 1773740565 | 22 | 32 | 941 | 0 | 0 |
| 1773739965 | 22 | 32 | 941 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)