This is the latest recevied telemetry packets stored in our database for station/object EA4AOJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794351468 | 20 | 43 | 938 | 0 | 0 |
| 1794350869 | 20 | 43 | 938 | 0 | 0 |
| 1794350269 | 20 | 43 | 937 | 0 | 0 |
| 1794349667 | 20 | 42 | 937 | 0 | 0 |
| 1794349067 | 20 | 43 | 938 | 0 | 0 |
| 1794348467 | 20 | 43 | 937 | 0 | 0 |
| 1794347866 | 20 | 42 | 937 | 0 | 0 |
| 1794347266 | 20 | 42 | 937 | 0 | 0 |
| 1794346666 | 20 | 43 | 937 | 0 | 0 |
| 1794346065 | 20 | 43 | 937 | 0 | 0 |
| 1794345465 | 20 | 42 | 937 | 0 | 0 |
| 1794344865 | 19 | 43 | 937 | 0 | 0 |
| 1794344264 | 19 | 43 | 937 | 0 | 0 |
| 1794343664 | 19 | 42 | 937 | 0 | 0 |
| 1794343064 | 20 | 43 | 937 | 0 | 0 |
| 1794342677 | 19 | 43 | 937 | 0 | 0 |
| 1794342077 | 19 | 42 | 937 | 0 | 0 |
| 1794341476 | 19 | 43 | 937 | 0 | 0 |
| 1794340876 | 19 | 42 | 937 | 0 | 0 |
| 1794340276 | 19 | 42 | 937 | 0 | 0 |
| 1794339675 | 19 | 42 | 937 | 0 | 0 |
| 1794339075 | 19 | 42 | 937 | 0 | 0 |
| 1794338475 | 19 | 42 | 937 | 0 | 0 |
| 1794337873 | 19 | 42 | 937 | 0 | 0 |
| 1794337273 | 19 | 42 | 937 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)