This is the latest recevied telemetry packets stored in our database for station/object SP6RJ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786415059 | 0 Count | 877 Count | 0 Count | 0 VDC | 0 VDC |
| 1786414463 | 0 Count | 875 Count | 0 Count | 0 VDC | 0 VDC |
| 1786413863 | 0 Count | 875 Count | 0 Count | 0 VDC | 0 VDC |
| 1786413263 | 0 Count | 874 Count | 0 Count | 0 VDC | 0 VDC |
| 1786412663 | 0 Count | 873 Count | 0 Count | 0 VDC | 0 VDC |
| 1786412063 | 0 Count | 872 Count | 0 Count | 0 VDC | 0 VDC |
| 1786411463 | 0 Count | 871 Count | 0 Count | 0 VDC | 0 VDC |
| 1786410862 | 0 Count | 871 Count | 0 Count | 0 VDC | 0 VDC |
| 1786410262 | 0 Count | 871 Count | 0 Count | 0 VDC | 0 VDC |
| 1786409662 | 0 Count | 870 Count | 0 Count | 0 VDC | 0 VDC |
| 1786409062 | 0 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1786408462 | 0 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1786407862 | 0 Count | 867 Count | 0 Count | 0 VDC | 0 VDC |
| 1786407262 | 0 Count | 866 Count | 0 Count | 0 VDC | 0 VDC |
| 1786406662 | 0 Count | 866 Count | 0 Count | 0 VDC | 0 VDC |
| 1786406061 | 0 Count | 865 Count | 0 Count | 0 VDC | 0 VDC |
| 1786405461 | 0 Count | 865 Count | 0 Count | 0 VDC | 0 VDC |
| 1786404861 | 0 Count | 864 Count | 0 Count | 0 VDC | 0 VDC |
| 1786404261 | 0 Count | 864 Count | 0 Count | 0 VDC | 0 VDC |
| 1786403661 | 0 Count | 863 Count | 0 Count | 0 VDC | 0 VDC |
| 1786403061 | 0 Count | 863 Count | 0 Count | 0 VDC | 0 VDC |
| 1786402461 | 0 Count | 861 Count | 0 Count | 0 VDC | 0 VDC |
| 1786401861 | 0 Count | 861 Count | 0 Count | 0 VDC | 0 VDC |
| 1786401261 | 0 Count | 860 Count | 0 Count | 0 VDC | 0 VDC |
| 1786400661 | 0 Count | 858 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)