This is the latest recevied telemetry packets stored in our database for station/object WA7DEM-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786432179 | 12.63 Volts | 78.01 Deg.F | 0 | 0 | 0 |
| 1786430386 | 12.66 Volts | 78.01 Deg.F | 0 | 0 | 0 |
| 1786428592 | 12.66 Volts | 78.89 Deg.F | 0 | 0 | 0 |
| 1786425007 | 12.63 Volts | 80.65 Deg.F | 0 | 0 | 0 |
| 1786423217 | 12.66 Volts | 81.53 Deg.F | 0 | 0 | 0 |
| 1786414248 | 12.72 Volts | 88.57 Deg.F | 0 | 0 | 0 |
| 1786412455 | 12.75 Volts | 89.45 Deg.F | 0 | 0 | 0 |
| 1786407072 | 12.83 Volts | 92.97 Deg.F | 0 | 0 | 0 |
| 1786405278 | 12.86 Volts | 95.61 Deg.F | 0 | 0 | 0 |
| 1786403485 | 12.86 Volts | 99.13 Deg.F | 0 | 0 | 0 |
| 1786401689 | 12.89 Volts | 102.65 Deg.F | 0 | 0 | 0 |
| 1786398097 | 12.83 Volts | 104.41 Deg.F | 0 | 0 | 0 |
| 1786392709 | 13.36 Volts | 102.65 Deg.F | 0 | 0 | 0 |
| 1786390914 | 13.54 Volts | 100.89 Deg.F | 0 | 0 | 0 |
| 1786389118 | 13.57 Volts | 99.13 Deg.F | 0 | 0 | 0 |
| 1786387323 | 13.51 Volts | 95.61 Deg.F | 0 | 0 | 0 |
| 1786385529 | 13.51 Volts | 86.81 Deg.F | 0 | 0 | 0 |
| 1786383736 | 12.95 Volts | 79.77 Deg.F | 0 | 0 | 0 |
| 1786381944 | 12.86 Volts | 77.13 Deg.F | 0 | 0 | 0 |
| 1786378360 | 12.75 Volts | 75.37 Deg.F | 0 | 0 | 0 |
| 1786374775 | 12.69 Volts | 73.61 Deg.F | 0 | 0 | 0 |
| 1786372983 | 12.66 Volts | 73.61 Deg.F | 0 | 0 | 0 |
| 1786369400 | 12.66 Volts | 73.61 Deg.F | 0 | 0 | 0 |
| 1786367607 | 12.75 Volts | 74.49 Deg.F | 0 | 0 | 0 |
| 1786365815 | 12.66 Volts | 74.49 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)