This is the latest recevied telemetry packets stored in our database for station/object KD8NJV-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780164188 | 405 | 806 | 0 | 0 | 0 |
| 1780160595 | 406 | 798 | 0 | 0 | 0 |
| 1780158799 | 406 | 792 | 0 | 0 | 0 |
| 1780157003 | 407 | 786 | 0 | 0 | 0 |
| 1780155207 | 403 | 779 | 0 | 0 | 0 |
| 1780153412 | 410 | 772 | 0 | 0 | 0 |
| 1780151615 | 461 | 770 | 0 | 0 | 0 |
| 1780151562 | 459 | 769 | 0 | 0 | 0 |
| 1780151383 | 461 | 769 | 0 | 0 | 0 |
| 1780151301 | 462 | 770 | 0 | 0 | 0 |
| 1780151211 | 463 | 769 | 0 | 0 | 0 |
| 1780151121 | 460 | 768 | 0 | 0 | 0 |
| 1780151032 | 461 | 768 | 0 | 0 | 0 |
| 1780150941 | 461 | 768 | 0 | 0 | 0 |
| 1780150852 | 459 | 767 | 0 | 0 | 0 |
| 1780150748 | 464 | 766 | 0 | 0 | 0 |
| 1780149024 | 464 | 767 | 0 | 0 | 0 |
| 1780148861 | 468 | 767 | 0 | 0 | 0 |
| 1780147999 | 464 | 767 | 0 | 0 | 0 |
| 1780147787 | 463 | 767 | 0 | 0 | 0 |
| 1780147738 | 463 | 766 | 0 | 0 | 0 |
| 1780146132 | 390 | 767 | 0 | 0 | 0 |
| 1780144336 | 397 | 768 | 0 | 0 | 0 |
| 1780142541 | 397 | 771 | 0 | 0 | 0 |
| 1780140746 | 397 | 770 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)