This is the latest recevied telemetry packets stored in our database for station/object KD8NJV-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780266699 | 444 | 644 | 0 | 0 | 0 |
| 1780264897 | 443 | 644 | 0 | 0 | 0 |
| 1780263096 | 444 | 642 | 0 | 0 | 0 |
| 1780261296 | 443 | 641 | 0 | 0 | 0 |
| 1780259496 | 444 | 639 | 0 | 0 | 0 |
| 1780257696 | 444 | 639 | 0 | 0 | 0 |
| 1780255896 | 443 | 636 | 0 | 0 | 0 |
| 1780254097 | 444 | 635 | 0 | 0 | 0 |
| 1780252299 | 443 | 633 | 0 | 0 | 0 |
| 1780250501 | 444 | 632 | 0 | 0 | 0 |
| 1780248703 | 444 | 630 | 0 | 0 | 0 |
| 1780246905 | 443 | 627 | 0 | 0 | 0 |
| 1780245108 | 445 | 626 | 0 | 0 | 0 |
| 1780243310 | 444 | 625 | 0 | 0 | 0 |
| 1780241514 | 443 | 623 | 0 | 0 | 0 |
| 1780239717 | 443 | 621 | 0 | 0 | 0 |
| 1780237921 | 443 | 619 | 0 | 0 | 0 |
| 1780236125 | 444 | 617 | 0 | 0 | 0 |
| 1780234330 | 444 | 613 | 0 | 0 | 0 |
| 1780232536 | 443 | 609 | 0 | 0 | 0 |
| 1780230742 | 444 | 606 | 0 | 0 | 0 |
| 1780228948 | 444 | 604 | 0 | 0 | 0 |
| 1780227155 | 444 | 603 | 0 | 0 | 0 |
| 1780225361 | 444 | 603 | 0 | 0 | 0 |
| 1780223568 | 444 | 603 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)