This is the latest recevied telemetry packets stored in our database for station/object LA8DKA-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1773740817 | 11.7 VDC | 0 | 0 | 0 | 0 |
| 1773739917 | 11.72 VDC | 0 | 0 | 0 | 0 |
| 1773739016 | 11.74 VDC | 0 | 0 | 0 | 0 |
| 1773738115 | 11.7 VDC | 0 | 0 | 0 | 0 |
| 1773737215 | 11.7 VDC | 0 | 0 | 0 | 0 |
| 1773736315 | 11.68 VDC | 0 | 0 | 0 | 0 |
| 1773735415 | 11.64 VDC | 0 | 0 | 0 | 0 |
| 1773734515 | 11.68 VDC | 0 | 0 | 0 | 0 |
| 1773733615 | 11.62 VDC | 0 | 0 | 0 | 0 |
| 1773732715 | 11.68 VDC | 0 | 0 | 0 | 0 |
| 1773731815 | 11.68 VDC | 0 | 0 | 0 | 0 |
| 1773730915 | 11.64 VDC | 0 | 0 | 0 | 0 |
| 1773730014 | 11.68 VDC | 0 | 0 | 0 | 0 |
| 1773729114 | 11.66 VDC | 0 | 0 | 0 | 0 |
| 1773728214 | 11.68 VDC | 0 | 0 | 0 | 0 |
| 1773727314 | 11.66 VDC | 0 | 0 | 0 | 0 |
| 1773726414 | 11.66 VDC | 0 | 0 | 0 | 0 |
| 1773725514 | 11.66 VDC | 0 | 0 | 0 | 0 |
| 1773724614 | 11.64 VDC | 0 | 0 | 0 | 0 |
| 1773723714 | 11.66 VDC | 0 | 0 | 0 | 0 |
| 1773722811 | 11.66 VDC | 0 | 0 | 0 | 0 |
| 1773721911 | 11.64 VDC | 0 | 0 | 0 | 0 |
| 1773721011 | 11.68 VDC | 0 | 0 | 0 | 0 |
| 1773720111 | 11.64 VDC | 0 | 0 | 0 | 0 |
| 1773719210 | 11.66 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)