This is the latest recevied telemetry packets stored in our database for station/object KC0OOO-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1790281227 | 482 | 11.2 F | 0 V | 0 M | 0 |
| 1790281205 | 482 | 11.2 F | 0 V | 0 M | 0 |
| 1790281177 | 481 | 11.2 F | 0 V | 0 M | 0 |
| 1790281150 | 486 | 11.2 F | 0 V | 0 M | 0 |
| 1790281121 | 490 | 11.2 F | 0 V | 0 M | 0 |
| 1790281065 | 487 | 11.2 F | 0 V | 0 M | 0 |
| 1790281060 | 478 | 11.2 F | 0 V | 0 M | 0 |
| 1790280865 | 485 | 11.1 F | 0 V | 0 M | 0 |
| 1790280860 | 481 | 11.1 F | 0 V | 0 M | 0 |
| 1790280802 | 478 | 11.1 F | 0 V | 0 M | 0 |
| 1790280753 | 488 | 11 F | 0 V | 0 M | 0 |
| 1790280724 | 477 | 11 F | 0 V | 0 M | 0 |
| 1790280714 | 482 | 11 F | 0 V | 0 M | 0 |
| 1790280688 | 480 | 11.1 F | 0 V | 0 M | 0 |
| 1790280492 | 480 | 11.3 F | 0 V | 0 M | 0 |
| 1790280487 | 481 | 11.4 F | 0 V | 0 M | 0 |
| 1790280476 | 480 | 11.3 F | 0 V | 0 M | 0 |
| 1790280352 | 491 | 11.3 F | 0 V | 0 M | 0 |
| 1790280318 | 489 | 11.3 F | 0 V | 0 M | 0 |
| 1790280314 | 486 | 11.3 F | 0 V | 0 M | 0 |
| 1790280196 | 484 | 11.3 F | 0 V | 0 M | 0 |
| 1790280050 | 491 | 11.3 F | 0 V | 0 M | 0 |
| 1790264905 | 497 | 10.3 F | 0 V | 0 M | 0 |
| 1790264551 | 495 | 10.3 F | 0 V | 0 M | 0 |
| 1790264547 | 489 | 10.3 F | 0 V | 0 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)