This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794330901 | 3 Count | 115 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1794329101 | 2 Count | 85 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1794327302 | 1 Count | 57 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1794325502 | 0 Count | 29 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1794323703 | 34 Count | 1003 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1794321904 | 33 Count | 974 Count | 0 Count | 4.23 VDC | 0.42 VDC |
| 1794320105 | 32 Count | 927 Count | 0 Count | 4.23 VDC | 1.82 VDC |
| 1794318305 | 31 Count | 905 Count | 0 Count | 4.23 VDC | 4.2 VDC |
| 1794316506 | 30 Count | 883 Count | 0 Count | 4.23 VDC | 4.2 VDC |
| 1794314707 | 29 Count | 866 Count | 0 Count | 4.23 VDC | 4.2 VDC |
| 1794312908 | 28 Count | 843 Count | 0 Count | 4.23 VDC | 4.2 VDC |
| 1794311108 | 27 Count | 835 Count | 0 Count | 4.23 VDC | 4.2 VDC |
| 1794309310 | 26 Count | 818 Count | 0 Count | 4.23 VDC | 4.2 VDC |
| 1794307511 | 25 Count | 810 Count | 0 Count | 4.23 VDC | 4.2 VDC |
| 1794305712 | 24 Count | 800 Count | 0 Count | 4.23 VDC | 4.2 VDC |
| 1794303912 | 23 Count | 778 Count | 0 Count | 4.23 VDC | 4.2 VDC |
| 1794302114 | 22 Count | 769 Count | 0 Count | 4.23 VDC | 4.2 VDC |
| 1794300315 | 21 Count | 760 Count | 0 Count | 4.23 VDC | 4.2 VDC |
| 1794298516 | 20 Count | 739 Count | 0 Count | 4.23 VDC | 4.2 VDC |
| 1794296716 | 19 Count | 730 Count | 0 Count | 4.23 VDC | 4.2 VDC |
| 1794294917 | 18 Count | 719 Count | 0 Count | 4.23 VDC | 4.2 VDC |
| 1794293117 | 17 Count | 699 Count | 0 Count | 4.23 VDC | 2.52 VDC |
| 1794291318 | 16 Count | 652 Count | 0 Count | 4.23 VDC | 2.42 VDC |
| 1794289518 | 15 Count | 617 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1794287719 | 14 Count | 564 Count | 0 Count | 4.23 VDC | 0.32 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)