This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794352490 | 38 Count | 434 Count | 0 Count | 3.86 VDC | 0 VDC |
| 1794350690 | 37 Count | 425 Count | 0 Count | 3.86 VDC | 0 VDC |
| 1794348891 | 36 Count | 415 Count | 0 Count | 3.86 VDC | 0 VDC |
| 1794347091 | 35 Count | 406 Count | 0 Count | 3.86 VDC | 0 VDC |
| 1794345292 | 34 Count | 396 Count | 0 Count | 3.86 VDC | 0 VDC |
| 1794343493 | 33 Count | 385 Count | 0 Count | 3.86 VDC | 0 VDC |
| 1794341694 | 32 Count | 370 Count | 0 Count | 3.86 VDC | 0 VDC |
| 1794339894 | 31 Count | 362 Count | 0 Count | 3.87 VDC | 0 VDC |
| 1794338095 | 30 Count | 351 Count | 0 Count | 3.86 VDC | 0 VDC |
| 1794336295 | 29 Count | 333 Count | 0 Count | 3.86 VDC | 0 VDC |
| 1794334496 | 28 Count | 324 Count | 0 Count | 3.87 VDC | 0 VDC |
| 1794332697 | 27 Count | 313 Count | 0 Count | 3.87 VDC | 0 VDC |
| 1794330898 | 26 Count | 301 Count | 0 Count | 3.87 VDC | 0 VDC |
| 1794329099 | 25 Count | 292 Count | 0 Count | 3.87 VDC | 0 VDC |
| 1794327300 | 24 Count | 281 Count | 0 Count | 3.87 VDC | 0 VDC |
| 1794325500 | 23 Count | 267 Count | 0 Count | 3.87 VDC | 0 VDC |
| 1794323701 | 22 Count | 258 Count | 0 Count | 3.87 VDC | 0 VDC |
| 1794321901 | 21 Count | 249 Count | 0 Count | 3.87 VDC | 0 VDC |
| 1794320103 | 20 Count | 231 Count | 0 Count | 3.87 VDC | 0 VDC |
| 1794318303 | 19 Count | 221 Count | 0 Count | 3.87 VDC | 0.44 VDC |
| 1794316504 | 18 Count | 211 Count | 0 Count | 3.88 VDC | 0.42 VDC |
| 1794314704 | 17 Count | 202 Count | 0 Count | 3.88 VDC | 0.38 VDC |
| 1794312905 | 16 Count | 192 Count | 0 Count | 3.88 VDC | 0.8 VDC |
| 1794311106 | 15 Count | 183 Count | 0 Count | 3.88 VDC | 0.6 VDC |
| 1794309306 | 14 Count | 165 Count | 0 Count | 3.88 VDC | 2.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)