This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1764961314 | 4 V | 0 V | 228 mW | 32.1 degC | 99187.5 Pa |
| 1764961246 | 4 V | 0 V | 184 mW | 32.2 degC | 99187.5 Pa |
| 1764961172 | 4 V | 0 V | 220 mW | 31.9 degC | 99175 Pa |
| 1764961167 | 4 V | 0 V | 210 mW | 31.7 degC | 99187.5 Pa |
| 1764961118 | 4 V | 0 V | 244 mW | 31.8 degC | 99175 Pa |
| 1764961052 | 4 V | 0 V | 168 mW | 31.7 degC | 99175 Pa |
| 1764960990 | 4 V | 0 V | 190 mW | 32.1 degC | 99162.5 Pa |
| 1764960935 | 4 V | 0 V | 190 mW | 32.5 degC | 99162.5 Pa |
| 1764960872 | 4 V | 0 V | 242 mW | 32.7 degC | 99175 Pa |
| 1764960831 | 4 V | 0 V | 230 mW | 32.5 degC | 99162.5 Pa |
| 1764960797 | 4 V | 0 V | 214 mW | 32.3 degC | 99162.5 Pa |
| 1764960752 | 4 V | 0 V | 218 mW | 32.7 degC | 99162.5 Pa |
| 1764960686 | 4 V | 0 V | 196 mW | 32.1 degC | 99162.5 Pa |
| 1764960605 | 4 V | 0 V | 178 mW | 31.8 degC | 99162.5 Pa |
| 1764960537 | 4 V | 0 V | 246 mW | 32.6 degC | 99162.5 Pa |
| 1764960502 | 4 V | 0 V | 218 mW | 32.2 degC | 99125 Pa |
| 1764960443 | 4 V | 0 V | 216 mW | 32.2 degC | 99162.5 Pa |
| 1764960401 | 4 V | 0 V | 244 mW | 33.1 degC | 99162.5 Pa |
| 1764960363 | 4 V | 0 V | 210 mW | 32.4 degC | 99137.5 Pa |
| 1764960272 | 4 V | 0 V | 166 mW | 32.3 degC | 99150 Pa |
| 1764960199 | 4 V | 0 V | 256 mW | 33 degC | 99162.5 Pa |
| 1764960166 | 4 V | 0 V | 204 mW | 31.8 degC | 99162.5 Pa |
| 1764960156 | 4 V | 0 V | 214 mW | 32.4 degC | 99125 Pa |
| 1764960049 | 4 V | 0 V | 208 mW | 31.9 degC | 99150 Pa |
| 1764959975 | 3.99 V | 0 V | 202 mW | 31.9 degC | 99162.5 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)