PenangAPRS Track

My position About ☰

reset

DL4MDW-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL4MDW-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbat*	Vsol*	Pbat*	Temp*	AirP*
1764951596	4.14 V	0.22 V	-108 mW	20.21 degC	100787.5 Pa
1764951476	4.14 V	0.21 V	-108 mW	20.51 degC	100787.5 Pa
1764951356	4.14 V	0.22 V	-108 mW	20.32 degC	100787.5 Pa
1764951236	4.14 V	0.21 V	-108 mW	20.4 degC	100787.5 Pa
1764951116	4.15 V	0.21 V	-108 mW	20.48 degC	100775 Pa
1764950996	4.15 V	0.21 V	-108 mW	20.51 degC	100787.5 Pa
1764950876	4.15 V	0.22 V	-108 mW	20.43 degC	100775 Pa
1764950756	4.15 V	0.21 V	-108 mW	20.26 degC	100787.5 Pa
1764950636	4.15 V	0.21 V	-108 mW	20.34 degC	100787.5 Pa
1764950516	4.15 V	0.21 V	-108 mW	20.37 degC	100787.5 Pa
1764950396	4.15 V	0.21 V	-108 mW	20.4 degC	100787.5 Pa
1764950276	4.16 V	0.22 V	-108 mW	20.43 degC	100787.5 Pa
1764950156	4.16 V	0.21 V	-108 mW	20.29 degC	100787.5 Pa
1764950036	4.16 V	0.22 V	-108 mW	20.32 degC	100787.5 Pa
1764949916	4.16 V	0.22 V	-108 mW	20.45 degC	100812.5 Pa
1764949796	4.16 V	0.21 V	-108 mW	20.34 degC	100812.5 Pa
1764949676	4.17 V	0.22 V	-34 mW	20.45 degC	100812.5 Pa
1764949556	4.18 V	0.22 V	140 mW	20.43 degC	100800 Pa
1764949436	4.18 V	0.21 V	156 mW	20.37 degC	100787.5 Pa
1764949316	4.18 V	0.21 V	172 mW	20.4 degC	100787.5 Pa
1764949196	4.18 V	0.21 V	194 mW	20.51 degC	100800 Pa
1764949076	4.18 V	0.21 V	218 mW	20.45 degC	100800 Pa
1764948956	4.18 V	0.21 V	244 mW	20.37 degC	100787.5 Pa
1764948836	4.18 V	0.21 V	274 mW	20.62 degC	100800 Pa
1764948716	4.18 V	0.22 V	310 mW	20.32 degC	100775 Pa

*Used Equation Coefficients:

Vbat: 0, 0.001, 0

Vsol: 0, 0.001, 0

Pbat: 0, 2, -4096

Temp: 0, 0.01, 0

AirP: 0, 12.5, 500

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)