This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769830636 | 96 Count | 754 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1769827036 | 96 Count | 739 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1769823436 | 96 Count | 731 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1769819836 | 96 Count | 721 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1769816236 | 96 Count | 712 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1769812636 | 96 Count | 703 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1769809036 | 96 Count | 694 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1769805435 | 96 Count | 686 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1769801835 | 96 Count | 677 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1769798235 | 96 Count | 669 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1769794635 | 96 Count | 656 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1769791035 | 96 Count | 647 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1769787435 | 96 Count | 634 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1769783834 | 96 Count | 621 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1769780234 | 96 Count | 611 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1769776634 | 96 Count | 595 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1769773034 | 96 Count | 584 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1769769435 | 96 Count | 571 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1769765835 | 96 Count | 563 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1769762235 | 96 Count | 554 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1769758635 | 96 Count | 546 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1769755034 | 96 Count | 539 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1769751434 | 96 Count | 533 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1769747834 | 96 Count | 527 Count | 0 Count | 3.91 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)