This is the latest recevied telemetry packets stored in our database for station/object CE4ERM-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794344164 | 20.6 C | 29.19 % | 1019 hPa | 0 | 0 |
| 1794344046 | 20.3 C | 27.91 % | 1018 hPa | 0 | 0 |
| 1794343558 | 25.3 C | 26.97 % | 1016.13 hPa | 0 | 0 |
| 1794343178 | 22 C | 28.51 % | 1020 hPa | 0 | 0 |
| 1794336822 | 18.7 C | 30.48 % | 1020.5 hPa | 0 | 0 |
| 1794335952 | 26.6 C | 33.42 % | 1021.63 hPa | 0 | 0 |
| 1794334172 | 15.4 C | 34.5 % | 1019.88 hPa | 0 | 0 |
| 1794332017 | 17.2 C | 31.62 % | 1021.75 hPa | 0 | 0 |
| 1794328463 | 20.4 C | 29.05 % | 1020.38 hPa | 0 | 0 |
| 1794328339 | 18.7 C | 28.23 % | 1021.63 hPa | 0 | 0 |
| 1794328091 | 21.9 C | 25.58 % | 1021 hPa | 0 | 0 |
| 1794327967 | 22.3 C | 23 % | 1020.88 hPa | 0 | 0 |
| 1794327851 | 22.7 C | 24.48 % | 1021 hPa | 0 | 0 |
| 1794327347 | 25.8 C | 19.25 % | 1022.88 hPa | 0 | 0 |
| 1794326975 | 30.6 C | 16.73 % | 1022 hPa | 0 | 0 |
| 1794325418 | 22.1 C | 28.63 % | 1022.88 hPa | 0 | 0 |
| 1794325171 | 17.4 C | 33.91 % | 1018.13 hPa | 0 | 0 |
| 1794325046 | 17.9 C | 33.97 % | 1020.63 hPa | 0 | 0 |
| 1794321864 | 25.8 C | 33.62 % | 1022 hPa | 0 | 0 |
| 1794321357 | 18.6 C | 37.1 % | 1022.25 hPa | 0 | 0 |
| 1794320249 | 25.5 C | 34.27 % | 1023.13 hPa | 0 | 0 |
| 1794310525 | 17.7 C | 53.44 % | 1023 hPa | 0 | 0 |
| 1794310409 | 16.8 C | 44.03 % | 1020 hPa | 0 | 0 |
| 1794310029 | 16.9 C | 46.8 % | 1020.88 hPa | 0 | 0 |
| 1794309913 | 17.6 C | 47.04 % | 1021.13 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)