This is the latest recevied telemetry packets stored in our database for station/object SR2ZYT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794352214 | 31 Count | 316 Count | 21 Count | 4.1 VDC | 0 VDC |
| 1794350414 | 28 Count | 286 Count | 19 Count | 4.1 VDC | 0 VDC |
| 1794348614 | 25 Count | 260 Count | 17 Count | 4.1 VDC | 0 VDC |
| 1794346814 | 22 Count | 232 Count | 15 Count | 4.1 VDC | 0 VDC |
| 1794345016 | 19 Count | 211 Count | 13 Count | 4.1 VDC | 0 VDC |
| 1794343215 | 16 Count | 188 Count | 11 Count | 4.1 VDC | 0 VDC |
| 1794341414 | 13 Count | 154 Count | 9 Count | 4.1 VDC | 0 VDC |
| 1794339615 | 11 Count | 133 Count | 8 Count | 4.1 VDC | 0 VDC |
| 1794337815 | 8 Count | 104 Count | 6 Count | 4.1 VDC | 0 VDC |
| 1794336015 | 5 Count | 71 Count | 4 Count | 4.1 VDC | 0 VDC |
| 1794334215 | 2 Count | 31 Count | 2 Count | 4.1 VDC | 0 VDC |
| 1794332415 | 108 Count | 1023 Count | 75 Count | 4.1 VDC | 0 VDC |
| 1794330617 | 103 Count | 990 Count | 71 Count | 4.1 VDC | 0 VDC |
| 1794328816 | 100 Count | 960 Count | 69 Count | 4.1 VDC | 0 VDC |
| 1794327017 | 97 Count | 932 Count | 67 Count | 4.1 VDC | 0 VDC |
| 1794325218 | 94 Count | 906 Count | 65 Count | 4.1 VDC | 0 VDC |
| 1794323418 | 91 Count | 877 Count | 63 Count | 4.1 VDC | 0 VDC |
| 1794321619 | 88 Count | 851 Count | 61 Count | 4.1 VDC | 0 VDC |
| 1794319820 | 84 Count | 806 Count | 58 Count | 4.1 VDC | 0.78 VDC |
| 1794318021 | 81 Count | 783 Count | 56 Count | 4.1 VDC | 4.06 VDC |
| 1794316221 | 78 Count | 753 Count | 54 Count | 4.1 VDC | 4.34 VDC |
| 1794314421 | 75 Count | 723 Count | 52 Count | 4.1 VDC | 4.34 VDC |
| 1794312621 | 72 Count | 680 Count | 50 Count | 4.11 VDC | 4.34 VDC |
| 1794310823 | 69 Count | 671 Count | 48 Count | 4.11 VDC | 4.34 VDC |
| 1794307225 | 60 Count | 654 Count | 41 Count | 4.1 VDC | 4.34 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)