This is the latest recevied telemetry packets stored in our database for station/object KB4MDD-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794358359 | 12.28 Volts | 91.46 Deg.F | 0 | 0 | 0 |
| 1794358270 | 12.25 Volts | 90.58 Deg.F | 0 | 0 | 0 |
| 1794358183 | 12.28 Volts | 90.58 Deg.F | 0 | 0 | 0 |
| 1794357859 | 12.31 Volts | 87.07 Deg.F | 0 | 0 | 0 |
| 1794357813 | 12.22 Volts | 87.07 Deg.F | 0 | 0 | 0 |
| 1794357531 | 13.86 Volts | 81.79 Deg.F | 0 | 0 | 0 |
| 1794357494 | 13.65 Volts | 80.92 Deg.F | 0 | 0 | 0 |
| 1794357361 | 13.77 Volts | 79.16 Deg.F | 0 | 0 | 0 |
| 1794352903 | 12.25 Volts | 92.34 Deg.F | 0 | 0 | 0 |
| 1794352879 | 12.34 Volts | 93.22 Deg.F | 0 | 0 | 0 |
| 1794352866 | 12.22 Volts | 92.34 Deg.F | 0 | 0 | 0 |
| 1794352613 | 12.25 Volts | 92.34 Deg.F | 0 | 0 | 0 |
| 1794352357 | 12.28 Volts | 90.58 Deg.F | 0 | 0 | 0 |
| 1794352327 | 12.22 Volts | 90.58 Deg.F | 0 | 0 | 0 |
| 1794352305 | 12.28 Volts | 90.58 Deg.F | 0 | 0 | 0 |
| 1794352217 | 12.25 Volts | 89.71 Deg.F | 0 | 0 | 0 |
| 1794351624 | 12.28 Volts | 84.43 Deg.F | 0 | 0 | 0 |
| 1794351552 | 13.6 Volts | 81.79 Deg.F | 0 | 0 | 0 |
| 1794351517 | 13.65 Volts | 80.92 Deg.F | 0 | 0 | 0 |
| 1794351490 | 13.74 Volts | 80.92 Deg.F | 0 | 0 | 0 |
| 1794351473 | 13.74 Volts | 80.92 Deg.F | 0 | 0 | 0 |
| 1794351454 | 13.74 Volts | 80.92 Deg.F | 0 | 0 | 0 |
| 1794343291 | 12.28 Volts | 94.1 Deg.F | 0 | 0 | 0 |
| 1794343248 | 12.28 Volts | 94.1 Deg.F | 0 | 0 | 0 |
| 1794343056 | 12.31 Volts | 94.1 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)