This is the latest recevied telemetry packets stored in our database for station/object F5SGY-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780159432 | 320 | 0 | 0 | 0 | 0 |
| 1780158530 | 346 | 0 | 0 | 0 | 0 |
| 1780157627 | 359 | 0 | 0 | 0 | 0 |
| 1780156724 | 368 | 0 | 0 | 0 | 0 |
| 1780155821 | 383 | 0 | 0 | 0 | 0 |
| 1780150993 | 317 | 0 | 0 | 0 | 0 |
| 1780147579 | 311 | 0 | 0 | 0 | 0 |
| 1780146676 | 343 | 0 | 0 | 0 | 0 |
| 1780145773 | 358 | 0 | 0 | 0 | 0 |
| 1780144870 | 367 | 0 | 0 | 0 | 0 |
| 1780143967 | 372 | 0 | 0 | 0 | 0 |
| 1780143064 | 374 | 0 | 0 | 0 | 0 |
| 1780142161 | 374 | 0 | 0 | 0 | 0 |
| 1780141258 | 376 | 0 | 0 | 0 | 0 |
| 1780140355 | 391 | 0 | 0 | 0 | 0 |
| 1780139111 | 298 | 0 | 0 | 0 | 0 |
| 1780138695 | 316 | 0 | 0 | 0 | 0 |
| 1780137792 | 344 | 0 | 0 | 0 | 0 |
| 1780136889 | 358 | 0 | 0 | 0 | 0 |
| 1780135985 | 367 | 0 | 0 | 0 | 0 |
| 1780135083 | 372 | 0 | 0 | 0 | 0 |
| 1780134180 | 374 | 0 | 0 | 0 | 0 |
| 1780133276 | 375 | 0 | 0 | 0 | 0 |
| 1780132374 | 375 | 0 | 0 | 0 | 0 |
| 1780131471 | 377 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)