This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780214946 | 61 Count | 333 Count | 0 Count | 4.11 VDC | 5.1 VDC |
| 1780213147 | 59 Count | 319 Count | 0 Count | 4.11 VDC | 5.1 VDC |
| 1780211348 | 57 Count | 310 Count | 0 Count | 4.11 VDC | 5.1 VDC |
| 1780209549 | 55 Count | 300 Count | 0 Count | 4.11 VDC | 4.38 VDC |
| 1780207749 | 53 Count | 291 Count | 0 Count | 4.11 VDC | 4.36 VDC |
| 1780205950 | 51 Count | 283 Count | 0 Count | 4.1 VDC | 4.38 VDC |
| 1780204150 | 49 Count | 265 Count | 0 Count | 4.1 VDC | 4.38 VDC |
| 1780202340 | 42 Count | 255 Count | 0 Count | 4.1 VDC | 4.38 VDC |
| 1780200540 | 40 Count | 242 Count | 0 Count | 4.1 VDC | 4.38 VDC |
| 1780198740 | 38 Count | 231 Count | 0 Count | 4.1 VDC | 4.38 VDC |
| 1780196940 | 36 Count | 218 Count | 0 Count | 4.1 VDC | 4.26 VDC |
| 1780195140 | 34 Count | 205 Count | 0 Count | 4.1 VDC | 1.58 VDC |
| 1780193341 | 32 Count | 193 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1780191539 | 30 Count | 175 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1780189741 | 28 Count | 163 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1780187941 | 26 Count | 149 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1780186142 | 24 Count | 135 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1780184343 | 22 Count | 123 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1780182543 | 20 Count | 110 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1780180745 | 18 Count | 98 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1780180733 | 13 Count | 98 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1780178933 | 11 Count | 84 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1780177133 | 9 Count | 71 Count | 0 Count | 4.11 VDC | 1 VDC |
| 1780175334 | 7 Count | 58 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1780173535 | 5 Count | 44 Count | 0 Count | 4.11 VDC | 1 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)