PenangAPRS Track

My position About ☰

reset

VK2GJ-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbat*	Psys*	Temp*	AirP*
1764945858	3.98 V	104 mW	33.2 degC	99200 Pa
1764945512	3.98 V	114 mW	33.2 degC	99212.5 Pa
1764945120	3.98 V	100 mW	33 degC	99212.5 Pa
1764944753	3.98 V	114 mW	33.2 degC	99225 Pa
1764944393	3.98 V	100 mW	32.4 degC	99225 Pa
1764944056	3.98 V	100 mW	34.1 degC	99225 Pa
1764943685	3.98 V	112 mW	34.1 degC	99237.5 Pa
1764943319	3.98 V	100 mW	33.7 degC	99250 Pa
1764942951	3.98 V	112 mW	33.3 degC	99262.5 Pa
1764942598	3.98 V	102 mW	33.6 degC	99275 Pa
1764942266	3.98 V	124 mW	34.6 degC	99275 Pa
1764941869	3.98 V	102 mW	33.4 degC	99300 Pa
1764941543	3.98 V	114 mW	34 degC	99287.5 Pa
1764941167	3.98 V	106 mW	34.5 degC	99300 Pa
1764940809	3.98 V	112 mW	35.1 degC	99312.5 Pa
1764940429	3.98 V	108 mW	33.9 degC	99312.5 Pa
1764940083	3.98 V	100 mW	35.4 degC	99312.5 Pa
1764939718	3.98 V	124 mW	35.9 degC	99312.5 Pa
1764939501	3.98 V	158 mW	38.5 degC	99312.5 Pa
1764939059	3.98 V	150 mW	37.6 degC	99325 Pa
1764938659	3.98 V	114 mW	36.4 degC	99312.5 Pa
1764938260	3.98 V	272 mW	39.5 degC	99325 Pa
1764938061	3.98 V	230 mW	38.8 degC	99337.5 Pa
1764937875	3.98 V	266 mW	38.5 degC	99350 Pa
1764937604	3.98 V	166 mW	37.8 degC	99350 Pa

*Used Equation Coefficients:

Vbat: 0, 0.001, 0

Vsol: 0, 0.001, 0

Psys: 0, 2, 0

Temp: 0, 0.1, -100

AirP: 0, 12.5, 500

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)