This is the latest recevied telemetry packets stored in our database for station/object IZ1RFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773762767 | 0 Count | 491 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1773761867 | 0 Count | 475 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1773760967 | 0 Count | 458 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1773760066 | 0 Count | 441 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1773759166 | 0 Count | 418 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1773758266 | 0 Count | 401 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1773757366 | 0 Count | 390 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1773756466 | 0 Count | 378 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1773755566 | 0 Count | 364 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1773754666 | 0 Count | 348 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1773751966 | 0 Count | 302 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1773751066 | 0 Count | 293 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1773750165 | 0 Count | 274 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1773749265 | 0 Count | 266 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1773748365 | 0 Count | 249 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1773747465 | 0 Count | 237 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1773746565 | 0 Count | 217 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1773745665 | 0 Count | 204 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1773744765 | 0 Count | 191 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1773743865 | 0 Count | 174 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1773742965 | 0 Count | 161 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1773742064 | 0 Count | 146 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1773741165 | 0 Count | 123 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1773740264 | 0 Count | 101 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1773739364 | 0 Count | 82 Count | 0 Count | 4.26 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)