This is the latest recevied telemetry packets stored in our database for station/object EA4ENG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764913755 | 559 Count | 134 Count | 127 Count | 3.01 VDC | 0 VDC |
| 1764911948 | 556 Count | 133 Count | 126 Count | 3.12 VDC | 0 VDC |
| 1764910140 | 554 Count | 133 Count | 126 Count | 3.15 VDC | 0 VDC |
| 1764908333 | 550 Count | 131 Count | 124 Count | 3.24 VDC | 0 VDC |
| 1764906526 | 548 Count | 131 Count | 124 Count | 3.28 VDC | 0 VDC |
| 1764904719 | 544 Count | 129 Count | 122 Count | 3.29 VDC | 0 VDC |
| 1764902912 | 541 Count | 128 Count | 121 Count | 3.35 VDC | 0 VDC |
| 1764901105 | 537 Count | 126 Count | 119 Count | 3.38 VDC | 0 VDC |
| 1764899298 | 533 Count | 124 Count | 117 Count | 3.38 VDC | 0 VDC |
| 1764897490 | 529 Count | 122 Count | 115 Count | 3.42 VDC | 0 VDC |
| 1764895683 | 526 Count | 121 Count | 114 Count | 3.43 VDC | 0 VDC |
| 1764893876 | 523 Count | 120 Count | 113 Count | 3.45 VDC | 0 VDC |
| 1764892069 | 521 Count | 120 Count | 113 Count | 3.47 VDC | 0 VDC |
| 1764890262 | 519 Count | 120 Count | 113 Count | 3.48 VDC | 0 VDC |
| 1764888455 | 517 Count | 120 Count | 113 Count | 3.5 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)