This is the latest recevied telemetry packets stored in our database for station/object SQ5CZL-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1773787007 | 4.15 VDC | 0 VDC | 0 | 0 | 0 |
| 1773786106 | 4.15 VDC | 0 VDC | 0 | 0 | 0 |
| 1773785205 | 4.21 VDC | 0 VDC | 0 | 0 | 0 |
| 1773784304 | 4.21 VDC | 0 VDC | 0 | 0 | 0 |
| 1773783403 | 4.2 VDC | 0 VDC | 0 | 0 | 0 |
| 1773782502 | 4.19 VDC | 0 VDC | 0 | 0 | 0 |
| 1773781601 | 4.18 VDC | 0 VDC | 0 | 0 | 0 |
| 1773780700 | 4.17 VDC | 0 VDC | 0 | 0 | 0 |
| 1773779799 | 4.12 VDC | 0 VDC | 0 | 0 | 0 |
| 1773778898 | 4.06 VDC | 0 VDC | 0 | 0 | 0 |
| 1773777998 | 4.03 VDC | 0 VDC | 0 | 0 | 0 |
| 1773777097 | 4 VDC | 0 VDC | 0 | 0 | 0 |
| 1773776196 | 3.96 VDC | 0 VDC | 0 | 0 | 0 |
| 1773775295 | 3.9 VDC | 0 VDC | 0 | 0 | 0 |
| 1773774394 | 3.79 VDC | 0 VDC | 0 | 0 | 0 |
| 1773773493 | 3.54 VDC | 0 VDC | 0 | 0 | 0 |
| 1773772592 | 3.57 VDC | 0 VDC | 0 | 0 | 0 |
| 1773771691 | 3.6 VDC | 0 VDC | 0 | 0 | 0 |
| 1773770790 | 3.64 VDC | 0 VDC | 0 | 0 | 0 |
| 1773769889 | 3.69 VDC | 0 VDC | 0 | 0 | 0 |
| 1773768988 | 3.78 VDC | 0 VDC | 0 | 0 | 0 |
| 1773768087 | 3.72 VDC | 0 VDC | 0 | 0 | 0 |
| 1773767400 | 3.72 VDC | 0 VDC | 0 | 0 | 0 |
| 1773767387 | 3.69 VDC | 0 VDC | 0 | 0 | 0 |
| 1773767342 | 3.72 VDC | 0 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)