This is the latest recevied telemetry packets stored in our database for station/object CE3SUR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1773740570 | 6 | 23 C | 4.23 V | 500 M | 0 |
| 1773737856 | 6 | 23.7 C | 4.23 V | 530 M | 0 |
| 1773736420 | 6 | 24.8 C | 4.23 V | 500 M | 0 |
| 1773735663 | 4 | 27.1 C | 4.23 V | 540 M | 0 |
| 1773734196 | 5 | 25 C | 4.23 V | 500 M | 0 |
| 1773731777 | 3 | 24.2 C | 4.23 V | 550 M | 0 |
| 1773730084 | 5 | 24.3 C | 4.23 V | 560 M | 0 |
| 1773727809 | 6 | 24.6 C | 4.23 V | 550 M | 0 |
| 1773725728 | 5 | 25 C | 4.23 V | 520 M | 0 |
| 1773724239 | 5 | 25.3 C | 4.23 V | 500 M | 0 |
| 1773722357 | 5 | 25.8 C | 4.23 V | 510 M | 0 |
| 1773720722 | 4 | 26.1 C | 4.23 V | 530 M | 0 |
| 1773718647 | 4 | 26.6 C | 4.23 V | 490 M | 0 |
| 1773716304 | 5 | 27.1 C | 4.22 V | 580 M | 0 |
| 1773714364 | 3 | 27.9 C | 4.22 V | 480 M | 0 |
| 1773712764 | 4 | 29.8 C | 4.22 V | 550 M | 0 |
| 1773711295 | 4 | 28.5 C | 4.22 V | 480 M | 0 |
| 1773706666 | 5 | 30 C | 4.22 V | 540 M | 0 |
| 1773704033 | 6 | 31.3 C | 4.22 V | 500 M | 0 |
| 1773703008 | 5 | 31.2 C | 4.22 V | 490 M | 0 |
| 1773701126 | 6 | 31.9 C | 4.22 V | 510 M | 0 |
| 1773699922 | 3 | 32.3 C | 4.22 V | 500 M | 0 |
| 1773697422 | 9 | 33.1 C | 4.22 V | 540 M | 0 |
| 1773694854 | 5 | 34.1 C | 4.22 V | 470 M | 0 |
| 1773692386 | 6 | 35.2 C | 4.22 V | 500 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)