This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735175190 | 1370 | 719 | 392 | 585 | 0 |
| 1735174291 | 1368 | 719 | 386 | 584 | 0 |
| 1735173391 | 1370 | 719 | 392 | 583 | 0 |
| 1735172491 | 1370 | 721 | 397 | 582 | 0 |
| 1735172310 | 1370 | 722 | 392 | 581 | 0 |
| 1735171590 | 1370 | 722 | 392 | 580 | 0 |
| 1735170690 | 1370 | 723 | 392 | 579 | 0 |
| 1735169790 | 1372 | 722 | 397 | 578 | 0 |
| 1735168891 | 1370 | 721 | 397 | 577 | 0 |
| 1735168710 | 1365 | 721 | 386 | 576 | 0 |
| 1735167990 | 1370 | 718 | 397 | 575 | 0 |
| 1735167090 | 1368 | 715 | 392 | 574 | 0 |
| 1735166190 | 1375 | 713 | 392 | 573 | 0 |
| 1735165290 | 1368 | 712 | 392 | 572 | 0 |
| 1735165110 | 1370 | 712 | 386 | 571 | 0 |
| 1735164390 | 1368 | 710 | 386 | 570 | 0 |
| 1735163490 | 1368 | 709 | 386 | 569 | 0 |
| 1735162591 | 1368 | 708 | 386 | 568 | 0 |
| 1735161690 | 1368 | 706 | 386 | 567 | 0 |
| 1735161510 | 1368 | 705 | 386 | 566 | 0 |
| 1735160791 | 1368 | 704 | 386 | 565 | 0 |
| 1735159891 | 1368 | 699 | 386 | 564 | 0 |
| 1735158991 | 1365 | 698 | 376 | 563 | 0 |
| 1735158089 | 1370 | 695 | 381 | 562 | 0 |
| 1735157910 | 1370 | 694 | 386 | 561 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)