This is the latest recevied telemetry packets stored in our database for station/object MB7UHT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp_Int* | Temp_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764939988 | 6.6 deg.C | 6.7 deg.C | 0 | 0 | 0 |
| 1764936388 | 6.4 deg.C | 6.3 deg.C | 0 | 0 | 0 |
| 1764935188 | 6.3 deg.C | 6.4 deg.C | 0 | 0 | 0 |
| 1764933988 | 6.3 deg.C | 6.3 deg.C | 0 | 0 | 0 |
| 1764932788 | 6.1 deg.C | 6.3 deg.C | 0 | 0 | 0 |
| 1764930388 | 5.5 deg.C | 5.8 deg.C | 0 | 0 | 0 |
| 1764929188 | 5.4 deg.C | 5.5 deg.C | 0 | 0 | 0 |
| 1764927988 | 5.6 deg.C | 5.3 deg.C | 0 | 0 | 0 |
| 1764926788 | 4.9 deg.C | 4.9 deg.C | 0 | 0 | 0 |
| 1764925588 | 4.3 deg.C | 4.7 deg.C | 0 | 0 | 0 |
| 1764924388 | 3.8 deg.C | 3.9 deg.C | 0 | 0 | 0 |
| 1764923188 | 3.6 deg.C | 3.6 deg.C | 0 | 0 | 0 |
| 1764921988 | 3.4 deg.C | 3.6 deg.C | 0 | 0 | 0 |
| 1764920788 | 3.6 deg.C | 3.3 deg.C | 0 | 0 | 0 |
| 1764919588 | 2.8 deg.C | 2.9 deg.C | 0 | 0 | 0 |
| 1764918388 | 2.7 deg.C | 2.7 deg.C | 0 | 0 | 0 |
| 1764917188 | 2.7 deg.C | 2.7 deg.C | 0 | 0 | 0 |
| 1764915988 | 2.8 deg.C | 2.7 deg.C | 0 | 0 | 0 |
| 1764914788 | 3.6 deg.C | 2.9 deg.C | 0 | 0 | 0 |
| 1764913588 | 3.4 deg.C | 3.2 deg.C | 0 | 0 | 0 |
| 1764912388 | 3.7 deg.C | 3.6 deg.C | 0 | 0 | 0 |
| 1764911188 | 4 deg.C | 3.8 deg.C | 0 | 0 | 0 |
| 1764909988 | 4.3 deg.C | 4.6 deg.C | 0 | 0 | 0 |
| 1764908795 | 4.4 deg.C | 4.4 deg.C | 0 | 0 | 0 |
| 1764907588 | 4.7 deg.C | 4.5 deg.C | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp_Int: 0, 0.1, 0
Temp_Ext: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)