PenangAPRS Track

My position About ☰

reset

SP2RO-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2RO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1790313678	109 Count	1020 Count	74 Count	2.27 VDC
1790312777	107 Count	983 Count	73 Count	2.24 VDC
1790311877	106 Count	953 Count	73 Count	2.15 VDC
1790310976	104 Count	922 Count	72 Count	2.36 VDC
1790310075	103 Count	893 Count	72 Count	2.31 VDC
1790309174	81 Count	816 Count	51 Count	2.22 VDC
1790308274	58 Count	725 Count	29 Count	2.26 VDC
1790307373	45 Count	658 Count	17 Count	2.33 VDC
1790306472	44 Count	632 Count	17 Count	2.41 VDC
1790305571	42 Count	603 Count	16 Count	2.28 VDC
1790304670	41 Count	575 Count	16 Count	2.2 VDC
1790303770	39 Count	537 Count	15 Count	2.28 VDC
1790302868	38 Count	516 Count	15 Count	2.3 VDC
1790301968	36 Count	495 Count	14 Count	2.38 VDC
1790301067	35 Count	471 Count	14 Count	2.39 VDC
1790300166	31 Count	448 Count	11 Count	2.42 VDC
1790299265	30 Count	428 Count	11 Count	2.18 VDC
1790298365	28 Count	398 Count	10 Count	2.25 VDC
1790297464	27 Count	376 Count	10 Count	2.23 VDC
1790296563	25 Count	350 Count	9 Count	2.19 VDC
1790295662	24 Count	333 Count	9 Count	2.01 VDC
1790294761	22 Count	309 Count	8 Count	2.13 VDC
1790293861	18 Count	283 Count	5 Count	2.23 VDC
1790292960	16 Count	257 Count	4 Count	2.26 VDC
1790292059	15 Count	231 Count	4 Count	2.18 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)