This is the latest recevied telemetry packets stored in our database for station/object KG5BQX-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769727091 | 14.03 Volts | 77.13 DegF | 278 | 0 | 0 |
| 1769727048 | 14.09 Volts | 76.25 DegF | 425 | 0 | 0 |
| 1769727024 | 14.15 Volts | 76.25 DegF | 277 | 0 | 0 |
| 1769726934 | 14.12 Volts | 76.25 DegF | 278 | 0 | 0 |
| 1769726844 | 14.21 Volts | 75.37 DegF | 277 | 0 | 0 |
| 1769726754 | 14.24 Volts | 74.49 DegF | 278 | 0 | 0 |
| 1769726656 | 14.27 Volts | 73.61 DegF | 279 | 0 | 0 |
| 1769726535 | 14.33 Volts | 70.97 DegF | 283 | 0 | 0 |
| 1769726496 | 14.36 Volts | 70.09 DegF | 281 | 0 | 0 |
| 1769726477 | 14.33 Volts | 69.21 DegF | 282 | 0 | 0 |
| 1769726455 | 14.24 Volts | 69.21 DegF | 285 | 0 | 0 |
| 1769726423 | 14.27 Volts | 68.33 DegF | 630 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)