This is the latest recevied telemetry packets stored in our database for station/object LW2EDM-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794319155 | 3.63 VDC | 26.4 C | 1013.13 hPa | 0 | 0 |
| 1794319104 | 3.6 VDC | 26.2 C | 1014.25 hPa | 0 | 0 |
| 1794319090 | 3.6 VDC | 26.2 C | 1014.5 hPa | 0 | 0 |
| 1794319010 | 3.63 VDC | 26.1 C | 1014.5 hPa | 0 | 0 |
| 1794318997 | 3.56 VDC | 26.1 C | 1015.38 hPa | 0 | 0 |
| 1794318825 | 3.61 VDC | 25.6 C | 1013.88 hPa | 0 | 0 |
| 1794318801 | 3.61 VDC | 25.6 C | 1013.75 hPa | 0 | 0 |
| 1794318775 | 3.61 VDC | 25.6 C | 1014.38 hPa | 0 | 0 |
| 1794318642 | 3.57 VDC | 25.3 C | 1013.75 hPa | 0 | 0 |
| 1794318604 | 3.53 VDC | 25.3 C | 1014.5 hPa | 0 | 0 |
| 1794317070 | 3.55 VDC | 24.6 C | 1013.5 hPa | 0 | 0 |
| 1794317014 | 3.9 VDC | 24.5 C | 1012.88 hPa | 0 | 0 |
| 1794309886 | 3.59 VDC | 21.4 C | 1014 hPa | 0 | 0 |
| 1794309855 | 3.59 VDC | 21.4 C | 1014 hPa | 0 | 0 |
| 1794309842 | 3.59 VDC | 21.4 C | 1014 hPa | 0 | 0 |
| 1794309825 | 3.61 VDC | 21.2 C | 1013.75 hPa | 0 | 0 |
| 1794309769 | 3.6 VDC | 21 C | 1014 hPa | 0 | 0 |
| 1794309633 | 3.61 VDC | 20.5 C | 1013.25 hPa | 0 | 0 |
| 1794309620 | 3.61 VDC | 20.5 C | 1013 hPa | 0 | 0 |
| 1794309584 | 3.51 VDC | 20.5 C | 1013.38 hPa | 0 | 0 |
| 1794260437 | 3.62 VDC | 19.1 C | 994.13 hPa | 0 | 0 |
| 1794260423 | 3.62 VDC | 19.1 C | 994.38 hPa | 0 | 0 |
| 1794260410 | 3.62 VDC | 19.1 C | 994.63 hPa | 0 | 0 |
| 1794260320 | 3.65 VDC | 30.6 C | 1015.63 hPa | 0 | 0 |
| 1794260212 | 3.61 VDC | 30.6 C | 1014.88 hPa | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)