This is the latest recevied telemetry packets stored in our database for station/object G3CWI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769777232 | 13.88 VDC | 0 | 0 | 0 | 0 |
| 1769773632 | 13.92 VDC | 0 | 0 | 0 | 0 |
| 1769770031 | 13.96 VDC | 0 | 0 | 0 | 0 |
| 1769766431 | 14.6 VDC | 0 | 0 | 0 | 0 |
| 1769762831 | 10.28 VDC | 0 | 0 | 0 | 0 |
| 1769759231 | 10.02 VDC | 0 | 0 | 0 | 0 |
| 1769756471 | 10.02 VDC | 0 | 0 | 0 | 0 |
| 1769752870 | 10 VDC | 0 | 0 | 0 | 0 |
| 1769749270 | 10.04 VDC | 0 | 0 | 0 | 0 |
| 1769745670 | 10.06 VDC | 0 | 0 | 0 | 0 |
| 1769742070 | 10.06 VDC | 0 | 0 | 0 | 0 |
| 1769738470 | 10.08 VDC | 0 | 0 | 0 | 0 |
| 1769734870 | 10.1 VDC | 0 | 0 | 0 | 0 |
| 1769733999 | 10.1 VDC | 0 | 0 | 0 | 0 |
| 1769730399 | 10.32 VDC | 0 | 0 | 0 | 0 |
| 1769726799 | 10.4 VDC | 0 | 0 | 0 | 0 |
| 1769723199 | 10.54 VDC | 0 | 0 | 0 | 0 |
| 1769722899 | 10.58 VDC | 0 | 0 | 0 | 0 |
| 1769719299 | 12.24 VDC | 0 | 0 | 0 | 0 |
| 1769715699 | 12.3 VDC | 0 | 0 | 0 | 0 |
| 1769712098 | 12.3 VDC | 0 | 0 | 0 | 0 |
| 1769708498 | 12.36 VDC | 0 | 0 | 0 | 0 |
| 1769704898 | 12.42 VDC | 0 | 0 | 0 | 0 |
| 1769701298 | 12.68 VDC | 0 | 0 | 0 | 0 |
| 1769697698 | 13.02 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)