This is the latest recevied telemetry packets stored in our database for station/object SR9SRC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786395606 | 0 Count | 115 Count | 0 Count | 0 VDC | 0 VDC |
| 1786395006 | 0 Count | 104 Count | 0 Count | 0 VDC | 0 VDC |
| 1786394406 | 0 Count | 89 Count | 0 Count | 0 VDC | 0 VDC |
| 1786393806 | 0 Count | 59 Count | 0 Count | 0 VDC | 0 VDC |
| 1786393205 | 0 Count | 48 Count | 0 Count | 0 VDC | 0 VDC |
| 1786392605 | 0 Count | 31 Count | 0 Count | 0 VDC | 0 VDC |
| 1786392005 | 0 Count | 17 Count | 0 Count | 0 VDC | 0 VDC |
| 1786391405 | 0 Count | 9 Count | 0 Count | 0 VDC | 0 VDC |
| 1786390805 | 0 Count | 1003 Count | 0 Count | 0 VDC | 0 VDC |
| 1786390205 | 0 Count | 993 Count | 0 Count | 0 VDC | 0 VDC |
| 1786389605 | 0 Count | 991 Count | 0 Count | 0 VDC | 0 VDC |
| 1786389005 | 0 Count | 976 Count | 0 Count | 0 VDC | 0 VDC |
| 1786388405 | 0 Count | 961 Count | 0 Count | 0 VDC | 0 VDC |
| 1786387805 | 0 Count | 951 Count | 0 Count | 0 VDC | 0 VDC |
| 1786387205 | 0 Count | 931 Count | 0 Count | 0 VDC | 0 VDC |
| 1786386605 | 0 Count | 905 Count | 0 Count | 0 VDC | 0 VDC |
| 1786386005 | 0 Count | 895 Count | 0 Count | 0 VDC | 0 VDC |
| 1786385404 | 0 Count | 884 Count | 0 Count | 0 VDC | 0 VDC |
| 1786384804 | 0 Count | 873 Count | 0 Count | 0 VDC | 0 VDC |
| 1786384204 | 0 Count | 860 Count | 0 Count | 0 VDC | 0 VDC |
| 1786383604 | 0 Count | 852 Count | 0 Count | 0 VDC | 0 VDC |
| 1786383004 | 0 Count | 840 Count | 0 Count | 0 VDC | 0 VDC |
| 1786382404 | 0 Count | 834 Count | 0 Count | 0 VDC | 0 VDC |
| 1786381804 | 0 Count | 827 Count | 0 Count | 0 VDC | 0 VDC |
| 1786381204 | 0 Count | 818 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)