This is the latest recevied telemetry packets stored in our database for station/object 2E0ONV-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1790321100 | 12 | 63.6 F | 3.72 V | 30 M | 0 |
| 1790318077 | 12 | 61.7 F | 3.73 V | 20 M | 0 |
| 1790315061 | 11 | 61.3 F | 3.74 V | 30 M | 0 |
| 1790312042 | 12 | 62 F | 3.71 V | 20 M | 0 |
| 1790309091 | 12 | 62.9 F | 3.74 V | 30 M | 0 |
| 1790306075 | 12 | 64.4 F | 3.75 V | 20 M | 0 |
| 1790303054 | 11 | 65.6 F | 3.76 V | 20 M | 0 |
| 1790300243 | 12 | 67.6 F | 3.76 V | 20 M | 0 |
| 1790297226 | 12 | 68.1 F | 3.77 V | 30 M | 0 |
| 1790294207 | 12 | 68.1 F | 3.78 V | 30 M | 0 |
| 1790291185 | 12 | 68.1 F | 3.78 V | 20 M | 0 |
| 1790288169 | 12 | 68.1 F | 3.79 V | 40 M | 0 |
| 1790285147 | 12 | 68.9 F | 3.79 V | 40 M | 0 |
| 1790282132 | 12 | 70.3 F | 3.8 V | 30 M | 0 |
| 1790279113 | 12 | 72.6 F | 3.81 V | 30 M | 0 |
| 1790277408 | 12 | 77.7 F | 3.87 V | 20 M | 0 |
| 1790277273 | 12 | 76.2 F | 3.89 V | 40 M | 0 |
| 1790276962 | 12 | 76.8 F | 3.9 V | 30 M | 0 |
| 1790276607 | 12 | 73.7 F | 3.87 V | 10 M | 0 |
| 1790274548 | 12 | 75.7 F | 3.81 V | 10 M | 0 |
| 1790272058 | 12 | 79.8 F | 3.81 V | 10 M | 0 |
| 1790270877 | 12 | 81.1 F | 3.81 V | 10 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)