This is the latest recevied telemetry packets stored in our database for station/object NS6X. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1794334330 | 8 | 35 C | 4.22 V | 50 M | 0 |
| 1794332127 | 10 | 30 C | 4.23 V | 80 M | 0 |
| 1794330839 | 9 | 30.5 C | 4.22 V | 50 M | 0 |
| 1794328886 | 10 | 29.4 C | 4.2 V | 30 M | 0 |
| 1794326539 | 7 | 26.7 C | 4.23 V | 60 M | 0 |
| 1794326401 | 11 | 25.6 C | 4.23 V | 80 M | 0 |
| 1794323414 | 11 | 21 C | 4.21 V | 70 M | 0 |
| 1794320414 | 11 | 19.7 C | 4.2 V | 70 M | 0 |
| 1794317414 | 11 | 20.3 C | 4.24 V | 80 M | 0 |
| 1794314414 | 10 | 20.4 C | 4.21 V | 90 M | 0 |
| 1794311414 | 11 | 20.8 C | 4.21 V | 80 M | 0 |
| 1794308414 | 10 | 21.5 C | 4.24 V | 70 M | 0 |
| 1794305414 | 10 | 21.8 C | 4.2 V | 70 M | 0 |
| 1794302414 | 12 | 22.5 C | 4.21 V | 70 M | 0 |
| 1794299414 | 10 | 23.2 C | 4.2 V | 70 M | 0 |
| 1794296414 | 10 | 23.8 C | 4.24 V | 80 M | 0 |
| 1794290414 | 12 | 25.9 C | 4.2 V | 80 M | 0 |
| 1794287414 | 12 | 27.7 C | 4.23 V | 70 M | 0 |
| 1794284414 | 12 | 28.5 C | 4.23 V | 80 M | 0 |
| 1794281414 | 11 | 29.7 C | 4.23 V | 80 M | 0 |
| 1794278414 | 12 | 30.8 C | 4.22 V | 70 M | 0 |
| 1794275414 | 10 | 33 C | 4.2 V | 80 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)