This is the latest recevied telemetry packets stored in our database for station/object M7AQH-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BARO* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764959853 | 23.17 C | 55.01 % | 1628 hPa | 0 | 0 |
| 1764959253 | 23.27 C | 55.07 % | 1628 hPa | 0 | 0 |
| 1764958653 | 23.36 C | 55.05 % | 1628 hPa | 0 | 0 |
| 1764958053 | 23.38 C | 55.12 % | 1628 hPa | 0 | 0 |
| 1764957453 | 23.5 C | 55.2 % | 1628 hPa | 0 | 0 |
| 1764956853 | 23.52 C | 55.43 % | 1628 hPa | 0 | 0 |
| 1764956253 | 23.55 C | 55.47 % | 1628 hPa | 0 | 0 |
| 1764955653 | 23.56 C | 55.61 % | 1628 hPa | 0 | 0 |
| 1764955053 | 23.63 C | 55.75 % | 1628 hPa | 0 | 0 |
| 1764954453 | 23.92 C | 55.73 % | 1628 hPa | 0 | 0 |
| 1764954441 | 23.92 C | 55.73 % | 1628 hPa | 0 | 0 |
| 1764953862 | 23.7 C | 55.41 % | 1628 hPa | 0 | 0 |
| 1764953264 | 23.63 C | 54.89 % | 1628 hPa | 0 | 0 |
| 1764952662 | 23.52 C | 55.04 % | 1628 hPa | 0 | 0 |
| 1764952062 | 23.34 C | 55.26 % | 1628 hPa | 0 | 0 |
| 1764951464 | 23.28 C | 55.49 % | 1628 hPa | 0 | 0 |
| 1764950862 | 23.25 C | 55.72 % | 1628 hPa | 0 | 0 |
| 1764950262 | 23.2 C | 55.65 % | 1628 hPa | 0 | 0 |
| 1764949662 | 23.23 C | 55.61 % | 1628 hPa | 0 | 0 |
| 1764949064 | 23.22 C | 55.75 % | 1628 hPa | 0 | 0 |
| 1764948462 | 23.14 C | 54.21 % | 1628 hPa | 0 | 0 |
| 1764947862 | 23.17 C | 55.29 % | 1628 hPa | 0 | 0 |
| 1764947262 | 23.13 C | 55.54 % | 1628 hPa | 0 | 0 |
| 1764946664 | 23.05 C | 55.56 % | 1628 hPa | 0 | 0 |
| 1764946065 | 23.1 C | 55.68 % | 1628 hPa | 0 | 0 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.01, 0
BARO: 0, 0.1, 800
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)