This is the latest recevied telemetry packets stored in our database for station/object DC9PA-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1794345677 | 3.71 VDC | 12.5 C | 58.11 % | 1010.75 hPa | 0 |
| 1794345629 | 3.7 VDC | 11.6 C | 58.69 % | 1011 hPa | 0 |
| 1794345496 | 3.72 VDC | 10.4 C | 53.37 % | 1008.5 hPa | 0 |
| 1794345356 | 3.71 VDC | 10.3 C | 49.25 % | 1009.5 hPa | 0 |
| 1794345296 | 3.72 VDC | 10.3 C | 49.22 % | 1010.5 hPa | 0 |
| 1794343112 | 3.74 VDC | 10.6 C | 48.6 % | 1012.25 hPa | 0 |
| 1794338594 | 3.83 VDC | 12.1 C | 46.83 % | 1012.75 hPa | 0 |
| 1794334075 | 3.91 VDC | 14.1 C | 44.84 % | 1010.63 hPa | 0 |
| 1794329537 | 4 VDC | 15.7 C | 49.89 % | 1012 hPa | 0 |
| 1794329451 | 4.01 VDC | 15.9 C | 51.41 % | 1011.5 hPa | 0 |
| 1794329440 | 4.01 VDC | 15.9 C | 51.55 % | 1010.5 hPa | 0 |
| 1794329394 | 4 VDC | 15.4 C | 52.44 % | 1012.13 hPa | 0 |
| 1794329241 | 4 VDC | 13.7 C | 55.28 % | 1012.63 hPa | 0 |
| 1794328886 | 4.03 VDC | 9.9 C | 59.54 % | 1012.13 hPa | 0 |
| 1794296709 | -9.4 VDC | 7.09 C | 528.63 % | 8107 hPa | 0 |
| 1794296605 | -9.5 VDC | 7.06 C | 524.88 % | 8121 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)